FX2N-485-BD MITSUBISHI PLC

In Stock

HURRY UP! Only 10 Products Left

$15601

$9360

40% OFF

pplicable PLC Number of occupied I/O points Communication method Communication speed Non-protocol communication
Computer link Parallel link N	N Network Inverter communication Communication format Transmission standard Transmission distance Connection method LED Isolation method Power supply specifications Power supply FX2N 0 point (This number is not related to the maximum number of input/output points of the PLC.) Half-duplex bidirectional when the connected PLC (FX2N) is V2.00 or earlier
or full-duplex bidirectional when the connected PLC (FX2N) is V2.00 or later. 300/600/1200/2400/4800/9600/19200 (bps) 19200 (bps) 38400 (bps) 4800/9600/19200 (bps) Non-Protocol Communication
Computer link (Dedicated protocol formats 1
Dedicated protocol formats 4)
Parallel Link
N	N Network
Inverter Communication (Function extension memory is required) Conforming to RS-485/RS-422 50 m maximum European terminal block RD
SD Not insulated 5 V DC 60 mA (internal power supply from PLC main unit) General specifications Ambient temperature Ambient humidity Vibration resistance Installed on DIN rail Frequency	10 to 57 Hz Frequency
Y
Z	10 times (80 min in each direction) Acceleration
Y
Z	10 times (80 min in each direction) Half amplitude
Y
Z	10 times (80 min in each direction) Acceleration
Y
Z	10 times (80 min in each direction) 147 m/s2 Acceleration
Action time	11 ms
3 times by half-sine pulse in each direction X
Y
and Z By noise simulator at noise voltage of 1
000 Vp-p
noise width of 1 ?s
rise time of 1 ns and period of 30 to 100 Hz Non-isolated between communication line and PLC main unit (Do not perform a withstand voltage test.) Non-isolated between communication line and PLC main unit (Do not perform an insulation resistance test.) Free from corrosive or flammable gas and excessive conductive dusts 2000 m or less The PLC cannot be used at a pressure higher than the atmospheric pressure to avoid damage.

pplicable PLC Number of occupied I/O points Communication method Communication speed Non-protocol communication

Computer link Parallel link N

N Network Inverter communication Communication format Transmission standard Transmission distance Connection method LED Isolation method Power supply specifications Power supply FX2N 0 point (This number is not related to the maximum number of input/output points of the PLC.) Half-duplex bidirectional when the connected PLC (FX2N) is V2.00 or earlier

or full-duplex bidirectional when the connected PLC (FX2N) is V2.00 or later. 300/600/1200/2400/4800/9600/19200 (bps) 19200 (bps) 38400 (bps) 4800/9600/19200 (bps) Non-Protocol Communication

Computer link (Dedicated protocol formats 1

Dedicated protocol formats 4)

Parallel Link

N Network

Inverter Communication (Function extension memory is required) Conforming to RS-485/RS-422 50 m maximum European terminal block RD

SD Not insulated 5 V DC 60 mA (internal power supply from PLC main unit) General specifications Ambient temperature Ambient humidity Vibration resistance Installed on DIN rail Frequency

10 to 57 Hz Frequency

10 times (80 min in each direction) Acceleration

10 times (80 min in each direction) Half amplitude

10 times (80 min in each direction) Acceleration

10 times (80 min in each direction) 147 m/s2 Acceleration

Action time

11 ms

3 times by half-sine pulse in each direction X

and Z By noise simulator at noise voltage of 1

000 Vp-p

noise width of 1 ?s

rise time of 1 ns and period of 30 to 100 Hz Non-isolated between communication line and PLC main unit (Do not perform a withstand voltage test.) Non-isolated between communication line and PLC main unit (Do not perform an insulation resistance test.) Free from corrosive or flammable gas and excessive conductive dusts 2000 m or less The PLC cannot be used at a pressure higher than the atmospheric pressure to avoid damage.

Graven Automation Pvt Ltd